BECKHOFF C9900-G0xx - Manual (Page 8)

Foreword
6 C9900-G0xx
1.4 Operator's obligation to exercise diligence
The operator must ensure that
 the products are only used as intended (see
Product description chapter);
 the products are only operated in sound condition and functioning properly.
 the products are operated only by suitably qualified and authorized personnel.
 the personnel is instructed regularly about relevant occupational safety and environmental
protection aspects, and is familiar with the operating instructions and in particular the safety
instructions contained herein.
 the instruction manual is in good condition and complete, and always available for reference at
the location where the products are used.
1.4.1 National regulations
Depending on the type of machine and plant in which the product is used, national regulations governing
the controllers of such machines will apply, and must be observed by the operator. These regulations
cover, amongst other things, the intervals between inspections of the controller. The operator must initiate
such inspections in good time.
1.4.2 Procedure in the event of a fault
In the event of product malfunctions please contact Headquarters
Beckhoff Automation GmbH
Eiserstraße 5
33415 Verl
Germany
Phone: + 49 (0) 5246/963-0
Fax: + 49 (0) 5246/963-198
E-mail: [email protected]
Beckhoff Service.
1.4.3 Operator requirements
All users of the product must have read the operating instructions and be aware of all the functions they
can access.