Adjusting the computer image, Setting the component image – Dynex DX-22L150A11 User Manual

Page 19

Advertising
background image

16

Adjusting the picture

DX-15L150A11/DX19L150A11/DX-22L150A11

Advanced Contrast—Opens the Advanced Contrast

submenu. Turn this On to optimize the picture display for a
more vivid image. You can also set the Dynamic Contrast
Ratio
to On to automatically adjust the contrast between
the light and dark areas of the picture.

4 Press MENU to return to the previous menu, or press EXIT to

close the menu.

Adjusting the computer image

Note: These settings are only available when the input source is VGA and

your TV is receiving a computer signal.

To adjust the computer image:

1 Make sure that your TV is in VGA mode. For more information, see

“Selecting the video input source” on page 13.

2 Press MENU. The on-screen menu opens.

3 Press

or

to

highlight

SETTINGS. The SETTINGS menu opens.

4 Press

or

to

highlight

Computer Settings, then press

ENTER. The Computer settings menu opens.

5 Press or to highlight an option, then press or to adjust

the option. You can adjust:

Auto Adjust—Automatically adjusts the image settings

such as position and phase

H-Position—Moves the image right or left
V-Position—Moves the image up or down
Clock—Adjusts the sample frequency

Phase—Adjusts the focus of stable images
Reset Computer Settings—Resets the computer settings

to factory default.

6 Press MENU to return to the previous menu, or press EXIT to

close the menu.

Setting the component image

Note: These settings are only available when the input source is

Component and your TV is receiving a signal.

To set the component image:

1 Press MENU. The on-screen menu opens.

2 Press or to highlight SETTINGS. The SETTINGS menu opens.

3 Press or to highlight Component Settings, then press

ENTER. The Component Settings menu opens.

4 Press or to highlight an option, then press or to adjust

the option. You can adjust:

Phase—To minimize horizontal distortion (0~100)
Reset Component Settings—Resets the component

settings to factory default.

5 Press MENU to return to the previous menu, or press EXIT to

close the menu.

DX-15L-150A11_09-1036.book Page 16 Tuesday, December 1, 2009 9:52 AM

Advertising