Dynex DX-22L150A11 - Manual (Page 23)

20
Setting parental controls DX-15L150A11/DX19L150A11/DX-22L150A11
3 Press or to highlight Channel Labels, then press ENTER.
The Channel Label screen opens.
4 Press or to select the channel for which you want to add or
change the label, the press to move the cursor to the label
selection field.
5 Press or to select a character, then press or to move to
the next position. Repeat to add more characters (you can add as
many as 11 characters).
6 Press ENTER to confirm the label.
7 Press
or to select Yes or No, then press ENTER to confirm.
8 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Checking digital TV signal strength
You can check the signal strength of digital channels to determine if you
need to adjust your antenna or digital cable input. The higher the signal
strength, the less likely you are to experience picture degradation.
To check signal strength:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS. The CHANNELS menu
opens. The signal strength is shown on the menu if you are
receiving a digital TV signal.
3 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Note: If you are tuned to a digital TV channel, you can press INFO to see
the digital signal strength.
Setting parental controls
Parental controls let you prevent your children from watching
inappropriate material on TV. When set, parental controls read the
rating of the program (with some exceptions, such as news and sports)
and deny access to programs that exceed the ratings level you select. To
watch programs that exceed the selected rating, you must enter a
password.
Setting or changing the password
To set the parental password:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS. The SETTINGS menu opens.
3 Press or to highlight Parental Controls, then press ENTER
or . The Enter Password screen opens.
DX-15L-150A11_09-1036.book Page 20 Tuesday, December 1, 2009 9:52 AM