Beisler 1360-4 - Manual (Page 33)

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-23
B.3
Operation
Ä Cross transport
This value is used for setting the actual transport distance from the A ma-
chine to the B machine or the distance along which the cross transport
moves the sewing piece from the wait position in front of the B machine
to the point where the swing arm picks it up.
Sewing speed at waist curve
The parameter changes the basic value of the puller speed when the waist
curve is sewn. Depending on the waist curvature, a puller speed that has
been adapted accordingly can be set.
Enabling or disabling functions
For specific sewing patterns or as the result of a specific material beha-
vior, all six functions can be enabled or disabled individually or in combi-
nations.
1. Select the function at the A machine or B machine:
• Press the cor fkey
s s
until the symbol assigned to the input field appears on a black back-
ground.
2. Move to the basic parameter menu of the selected function:
• Press the %key
3. Enable or disable the function:
• Press the hkey
4. Confirm input:
• Press the (key
Fig. 22: At the B machine 1 where the inseam 2 is effec-
ted, press the F8 key 4 to enable the puller 3 function.
When this program function is selected, the parameter list
assigned to this specific sewing function 5 is opened.
For details about the programming of sewing programs, please
refer to Section D, Programming Instructions, of these working
instructions.
Fig. 22