Belshaw Adamatic BX4E Eco-touch Convection Oven - Manual (Page 9)

FG 189 ECO-TOUCH 26 x18 UL 3 TRAY Belshaw Adaamatic t full 03-12 RAC 9
• STACKING TWO OVENS
1. After applying a small continuous bead of NSF approved sealant around the perimeter of
the lower unit, position ovens one on top of the other
2. Remove both ovens rear covers.
3. Remove blanking plate (fixed with silicone sealant) from damper tube of upper oven.
4. Fit end of flexible ducting over top damper tube and attach to lower oven damper tube. Use
silicone sealant and worm drive clips to fasten in position.
5. Replace both ovens rear covers and fix ovens together using clamping bracket M189-05-
00900. (One each side at the rear.)
6. If a stand is used under the ovens, it must be sealed to the oven using a continuous bead
of NSF approved sealant around the perimeter and attached by two brackets M189-05-
00900 (one each side) at the rear.
7. Fix top sealing ring M189-01-02000 over top pipe with NSF approved silicone sealant.
REAR VIEW OF TWO
RIGHT HAND OVENS