Besa Lighting Rail Connectors (Monorail Component) - Manual (Page 2)

INSTALLATION GUIDE
Model ICONN Live Rail Connector
(For use with Besa low voltage lighting systems only)
TICONN-SN, Rev.3 7-09
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
Live Rail
Connector
Rail Section
Philips
Set Screw
1. Loosen set screw on the Live Rail Connector, then carefully slide the Rail Sections into each end.
IMPORTANT: Use the Live Rail Connector on the factory-cut ends of the rail only.
2. Retighten Set Screw to secure Rail Sections together.
Factory-Cut End only
(Do not insert field-cut end)