Lconn_sn_front, rev1, Installation guide – Besa Lighting Rail Connectors (Monorail Component) User Manual
Page 3
Advertising
6695 Taylor Rd. Blacklick, OH 43004
www.besalighting.com
INSTALLATION GUIDE
Model LCONN Live Rail Connector
(For use with Besa low voltage lighting systems only)
TLCONN-SN, Rev.1 6-12
Live Rail
Connector
Rail Section
1. Using the Allen Wrench provided, loosen set screw on the Live Rail Connector, then carefully slide the Rail Sections
into each end.
IMPORTANT: Use the Live Rail Connector on the factory-cut ends of the rail only.
2. Using the Allen Wrench provided, retighten Set Screw to secure Rail Sections together.
Factory-Cut End only
(Do not insert field-cut end)
Allen Head Set Screw
Advertising