Directed Electronics 1.3X - Manual (Page 15)

15 © 2008 Directed Electronics. All rights reserved.
Aux 3
Command
: Press
A U X
three times and then press
A U X
.
Feedback
: The AUX LED turns on for 3-secs, AUX activation tone
sounds.
Notes
: This is an optional feature. See your sales rep/installer
for details.
Runtime check
Command
: Press
A U X
three-times, and then Hold for 1.5 seconds.
Feedback
: Remote start On tones sound.
Notes
: Runtime remaining is displayed as per the LED on the
remote. (See page 23). If the remote start is not active
the 2-way responds with an error tone.
Rear defogger
Command
: Press
A U X
four times, and then
A U X
. (Only after remote
start is on.)
Feedback
: Remote start LED on, 1 beep.
Notes
: Manually turns on the defogger when remote start is
on.