Beurer FCE 90 - Manual (Page 12)

12
2. unit description
1. Treatment head
2. LCD display
3. ON/OFF button
4. Negative ions button
5. Positive ions button
6. Heat button
7. Cool button
3. Initial use
Warning
Keep packaging material away from children! There is a choking hazard.
• Remove the device from the packaging and check that the device and all accessories are included and
not damaged.
• Plug the mains cable into the bottom of the device.
• Ensure that the mains cable does not pose a trip hazard.
• Plug the mains adapter into the socket.
4. Operation
Warning
Before starting the treatment, carry out a skin sensitivity test to check whether your skin is sensitive to the
cleansing milk and the Advanced Hydro Lift Cream. To do this, proceed as follows:
• Clean a patch of skin in the crook of your arm thoroughly, apply a little of the cleansing milk and Advan-
ced Hydro Lift Cream to this cleaned patch of skin and allow the product to soak in and dry.
• If the skin shows no reactions within the next 48 hours, you can use the tested products without hesita-
tion.
• If the skin appears to react before the end of the 48-hour period, you should not use the tested products
for facial treatment.
• Do not carry out the skin sensitivity test around the eye area.
You can use the device to care for your skin as well as to cleanse it.
During the treatment, hold the device so that your hand covers both chrome-coloured stripes on
the side of the device. If you do not do this, the electric circuit will be open and the ionic function
will not be possible.
Treatment applications
To ensure the best possible effect, we recommend that you only use the products provided when
using the cleansing treatment function and anti-aging treatment function, as these have been per-
fectly adapted for use with the FCE 90.
We recommend using the care treatment function in the morning and a combination of the clean-
sing and care treatment functions in the evening.
1
2
3
4
6
7
5