Beurer HLE 30 - Manual (Page 14)

14
5. care and storage
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter
into the device or accessories.
• To clean the shaver head, press the unlock buttons on the removable shaving foil and
disconnect this from the device.
• Additionally, the shaver blades can be removed from the shaver head and cleaned under
running water. Before cleaning the shaver head in this manner, hair can be removed
from the device using the cleaning brush.
• Every six months, oil the shaver foil and trimmer with a drop of sewing machine oil.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use aggressive cleaning agents or hard brushes.
First unplug the device and allow it to cool off. Then you can clean it with a soft, slightly
moistened cloth. Then wipe it dry with a soft, lint-free cloth.
6. Replacement parts and wearing parts
Item number and/or order number
Shaving foil and blade 576.50 *
Spacer comb (4mm) 163.266 **
Spacer comb (8mm) 163.267 **
Cleaning brush 163.268 **
Protective cap 163.269 **
Mains adapter 163.270 **
Charger 163.320 **
* Commercially available or from the corresponding service address (according to the
service address list)
** Available from the corresponding service address (according to the service address list)