Beurer IPL 10000+ User Manual

Page 40

Advertising
background image

40

6. How often should I use the beurer SalonPro System?

In the case of body hair treatment with the beurer SalonPro System, the first four sessions should be

performed two weeks apart. The fifth to seventh sessions inclusive can be performed four weeks apart.

Any further sessions should be performed if the hair has grown back until the desired results have been

achieved.
In the case of treatment of hair on the face below the cheekbones, the first six sessions should be per-

formed two weeks apart. The seventh to twelfth sessions can be performed four weeks apart. Any

further sessions should be performed if the hair has grown back until the desired results have been

achieved.
7. Is the beurer SalonPro System effective on white, grey or blond hair?

The beurer SalonPro System works best on dark hair types and on hair with a high melanin content.

Melanin is the pigment that gives hair and skin its colour and absorbs light energy. Black and dark

brown hair shows the best response. Brown and light brown hair also responds to treatment, but it usu-

ally requires more hair removal sessions. A limited effect can be seen on red hair. White, grey or blond

hair does not usually respond to the beurer SalonPro System, although several users have noticed

results after multiple hair removal sessions.
8. can I use the beurer SalonPro System on brown or black skin?

Do not use the beurer SalonPro System on naturally dark skin! It does not work!

The beurer SalonPro System is a light-based device that removes undesired hair by means of the selec-

tive treatment of the hair pigment. A different amount of pigment is present in the surrounding skin tis-

sue. The amount of pigment in the skin of any given person – which can be seen by the colour of the

skin – determines the degree of risk that the person is exposed to when using the beurer SalonPro Sys-

tem. Treating dark skin with a light-based hair removal procedure can have adverse consequences,

such as burns, blisters or discolouration of the skin (hyper- or hypopigmentation). The beurer SalonPro

System features an integrated skin colour sensor, which measures the colour of the treated skin at the

beginning of every treatment session and occasionally during the session itself. The skin colour sen-

sor prevents the beurer SalonPro System from issuing further pulses if it detects that the device is being

used on darker skin tones.
9. When will I see the results of the beurer SalonPro System?

As with all other hair removal devices that are based on light or lasers, the results cannot be seen

immediately and you could even think that nothing has happened at all. After a hair removal session,

the hair sometimes appears to grow back, but normally, the majority of these hairs will simply fall out

after two weeks. Additionally, hair grows in three different stages and the beurer SalonPro System only

has an effect on the hairs in the active growth phase. This is one of the main reasons why multiple ses-

sions are necessary to achieve the desired result.
10. can men use the beurer SalonPro System?

Although the beurer SalonPro System was developed for women, the device is also suitable for use by

men. However, men’s hair – typically on the chest – will require more hair removal sessions than women

do to achieve the desired results.
11. Why is my hair still growing although I treated them a week ago?

It may seem as though the hair is still growing up to two weeks after a hair removal session using the

beurer SalonPro System. This is know as the “ejection” process and, after around two weeks, you will

find that the hairs simply fall out or can be pulled out with a slight tug. (However, we do not recommend

that you pull on the hairs – simply let them fall out naturally). It is also possible that some hairs are not

affected by the beurer SalonPro System due to a missed application or different growth phases. These

hairs are treated in subsequent sessions and this is why several hair removal sessions are required to

achieve the best results with the beurer SalonPro System.
12. Is it true that some hairs grow back thinner and finer after a light-based hair removal treatment?

This phenomenon has been excessively documented by beauticians and doctors who use light- and

laser-based hair removal devices. It is possible that some hairs grow back thinner and finer after hair

Advertising
This manual is related to the following products: