Beurer FT 70 - Manual (Page 26)

26
Mode Ear Forehead Object
Voice output Your body temperature is ... Your body temperature is ... The object temperature is ...
Display
The temperature last measured, i.e. only the last value of a series of measurements, is automatically stored as soon as the
thermometer switches itself off or is switched off . There are 10 storage spaces available for this.
To switch the thermometer off , press the and Forehead buttons simultaneously for approx. three seconds.
If you do not take any further measurements, the thermometer switches itself off automatically after approx. one minute
after the measured values have been displayed.
To call up the saved values, switch the thermometer on and press the button.
The date, time, storage space number, the measurement mode symbol and the temperature are displayed in turn. Storage
space number and measurement are announced. Browse through the stored measurements by pressing the
button
repeatedly.
Mode Ear Forehead Object
Voice output Memory ..., your body tem-
perature was ... Memory ..., your body tem-
perature was ... Memory ..., the object tem-
perature was ...
Display
8. Changing the batteries
When the batteries get weak, the battery warning symbol appears . It is still possible to measure temperature. The
batteries must be replaced. When the battery symbol fl ashes and appears in the display, the batteries must be
replaced. If the batteries are too fl at, then the thermometer will switch off automatically.