Beurer BY 77 - Manual (Page 21)

21
7. Operation
7.1 Infrared night vision
In order to ensure that clear transmission images can be seen on the screen even
when it is dark, the video baby monitor automatically activates the infrared night vi-
sion in the dark. When the infrared night vision is active, a moon symbol ( ) is
shown on the screen.
7.2 Set the volume
The parent unit has 5 volume levels.
To adjust the volume, press the ( ) button or the ( ) button.
7.3 Set the brightness
The parent unit has 5 brightness levels.
To adjust the brightness, press the ( ) button or the ( ) button.
7.4 Intercom function
The parent unit has an intercom function.
To activate the intercom function, hold down the ( ) button on the parent unit and
speak into the unit. The words you have spoken can now be heard on the camera. To
deactivate the intercom function, release the ( ) button again.
7.5 Settings menu
You can adjust the following settings in the menu of the parent unit: zoom function,
lullabies, alarm, temperature unit, add/delete/view camera, alternating camera
image and power-saving mode.
• To access the settings menu, switch the parent unit on and press the ( ) button.
The following settings menu appears at the bottom of the camera screen:
You can navigate through the menu using the ( ) and ( ) buttons.
Zoom function
The parent unit has a zoom function to increase the size of the transmission image.
To activate the zoom function, proceed as follows:
• Use the up/down direction arrows (
/ ) to select the zoom function you re-
quire (1x or 2x).
• Confirm using the ( OK ) button.