Beurer BY 77 User Manual
Page 22
22
Lullabies
Via the parent unit, you can activate one of fi ve lullabies that will then be played over
the camera. To activate one of the lullabies, proceed as follows:
• Use the left/right direction arrows ( / ) to select the menu item
.
• Use the up/down direction arrows (
/
) to select the lullaby of your choice
(1, 2, 3, 4 or 5).
• Confi rm using the ( OK ) button.
Alarm
You can set an alarm on the parent unit – this will sound on the parent unit after 2, 4
or 6 hours, as you choose. To activate an alarm, proceed as follows:
• Use the left/right direction arrows ( / ) to select the menu item
.
• Use the up/down direction arrows (
/
) to select the time period after which
you wish the alarm to sound.
• Confi rm using the ( OK ) button.
Temperature unit
You can set the device to display the temperature in degrees Celsius (°C) or degrees
Fahrenheit (°F).
• Use the left/right direction arrows ( / ) to select the menu item .
• Use the up/down direction arrows (
/
) to select the required unit of tem-
perature.
• Confi rm using the ( OK )button.
Add camera
You can connect one parent unit with up to four cameras.
To add a camera to the parent unit, proceed as follows:
• Use the left/right direction arrows ( / ) to select the menu item
.
• Use the up/down direction arrows (
/
) to select the menu item
.
• Confi rm using the ( OK ) button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
/
) to select a number and confi rm with
the ( OK ) button.
appears on the screen and the unit searches for a camera.
• Now hold down the PAIR button on the rear of the camera until an acoustic signal
is heard and the transmission image from the camera that has been added appears
on the screen.