Beurer WL 32 - Manual (Page 20)

20
memory space number, hold down the button for 2
seconds.
6.10 Selecting preset radio stations
• To switch the radio on, press the button. “ on” will flash
on the display first. After approx. 10 seconds, mhz will
appear on the display with the currently set frequency.
• To select from the preset radio stations, press the
button.
6.11 Goodnight function
This function automatically switches off the radio after a set
period of time.
• Press the button twice.
“ sleep” will appear on the display with a flashing O5.
• Using the button, select the number of minutes after
which the radio should automatically switch off.
You can choose between 5, 10, 15, 30, 45, 60, 75 and 90
minutes.
• To confirm the number of minutes, wait approx. 5 seconds
until the display returns to the time. The desired number
of minutes is now set. To view the remaining minutes until
the radio switches off, press the button.
Note
• To end the goodnight function before the set number
of minutes has elapsed, press the button until OFF
appears on the display.
Note
If you have activated the goodnight function, the “mood
light with change of colour” function is deactivated. Only
light without change of colour is possible in this mode.
6.12 Listening to music via the AUX input
You can connect your MP3 player to the wake-up light
using the AUX input.
• Insert one end of the AUX cable (included in delivery) into
the AUX input on the rear of the wake-up light.
• Insert the other end of the AUX cable into the headphone
socket of the MP3 player.
Note
When listening to music via the AUX input, the volume level
can be adjusted on the MP3 player only, and not on the
wake-up light.
When a cable is connected to the AUX input on the device,
the “mood light with change of colour” function is deacti-
vated. Only light without change of colour is possible in this
mode.
7. Cleaning and maintenance
IMPORTANT
• Please make sure that no water enters the device. If this
should happen, reuse the device only when it has fully
dried out.