Beurer WL 30 - Manual (Page 14)

14
Light function
You can also use the device as a normal lamp.
• Press the light control button.
The light will switch on.
• To set the light intensity, move the light control button up or down.
• To switch the light off, press the light control button.
Radio function
• Press the radio control button.
The radio frequency currently set will appear on the display.
• To set the radio frequency, move the radio control button up or down.
tip: to start the automatic station scan, press and hold the radio control button
up or down briefly and then release it again.
• To set the radio volume, move the volume control button up or down.
• To switch the radio off, press the radio control button.
Natural sound function
You can also play a natural sound on the device independently of the alarm function.
• Press and hold the alarm control button for two seconds.
A natural sound will flash on the display. (example shown here = birdsong)
• To select a natural sound, move the alarm control button up or down. Confirm
by pressing the alarm control button.
• To set the natural sound volume, move the volume control button up or down.
• To switch the natural sound off, press the alarm control button.
sunrise function
You can also use the simulated sunrise function on the device independently of the alarm function.
Press and hold the light control button and the alarm control button simultane-
ously for two seconds. The light symbol, alarm symbol and a flashing number
(example shown here = 15 minutes) will appear on the display.
The flashing number indicates the sunrise duration in minutes.
The sunrise duration can be set to 15, 20, 40, 60, 80, 100 or 120 minutes.
• To set the sunrise duration, move the alarm control button up or down. Confirm by pressing the
alarm control button.
The current time will appear on the display. The sunrise function is now activated.
The light will gradually become brighter over the set period of time.
• To cancel the function early, press the light control button twice.