Blackstar HT-REVERB - Manual (Page 5)

Technical Specification
Power: 22V DC
Maximum Current Draw: 1.1A
Controls: Effect, Time, Tone, Dwell, Level
Valve: ECC83 (12AX7)
Switches: Effect On/Off Switch, Mode (Manual or Short/Long)
Switch
Indicator: Effect On/Off, Dwell, Mode (Short/Long Status),
Power On/Off (Valve Backlight LED)
Jacks: Input, Left (Mono) Output, Right Output
Input Impedance: 1MOhm
Output Impedance: <1kOhm
Nominal Operating Level: -10dBV
Dimensions (mm): 160 X 119 X80
Weight: 1.3kg
DC Adapter: ADA Series Supplied
English
10
14. Mode – Short/Long Footswitch
This footswitch has multiple functions. If held down for more than
1 second this switch will toggle the pedal between Manual mode
and Short/Long mode.
In Short/Long mode pressing this footswitch will toggle between
a preset short reverb time setting and preset long reverb time
setting.
In Manual mode this footswitch has no effect.
Note: To change between Manual mode and Fast/Slow mode
hold the switch for 1 second.
15. DC Inlet
For the input of the 22V DC / 1.1A adapter supplied. Always use
a Blackstar approved adapter.
English
9