Bladez Fitness E700i Elliptical - Manual (Page 15)

15
STEP 2
1) Connect the Upper Cable Wire (B-9) with the Lower Cable Wire (D-20). Slide the
Handlebar Post (B-1) onto the Main Frame (D-1) and attach with 8 Screws (H-1), 8 Flat
Washers (H-2), 8 Semi-washers (H-3) and 8 Spring Washers (H-4).
2) Place the Handlebar Post Covers (D-24 Left) and (D-25 Right) at the base of the
Handlebar Post (B-1) and align holes.
3) Attach the cover for the Handlebar Post (L) (D-24) and the cover for Handlebar Post (R)
(D-25) by using 2 Screws (R-3) and 2 Screws (R-4).