Bompani BOK34 User Manual

Page 18

Advertising
background image

UK - 16 -

If the edges of the refrigerator cabinet contacted by the door seal are hot:

• Especially in summer months (in hot weather), there might be warming of the surfaces

contacted by the seal on the refrigerator. This is normal.

If there is moisture on the inner parts of your refrigerator:

• Has the food been properly packaged and sealed? Have the containers been well

dried before they were put into the refrigerator?

• Are the doors of the refrigerator opened very frequently? Once the door is opened,

the humidity found in the air in the room enters the refrigerator. Especially if the
humidity levels in the room are very high. The more frequently the door is opened,
the faster will be the humidification.

• It is normal to have water drops formed on the back wall following the automatic

defrosting process (In Static Models).

If the doors are not being properly closed:

• Are food packages preventing the doors from being closed?

• Have the door compartments, shelves and drawers properly placed?

• Are the door seals defective or torn?

• Is your refrigerator standing on level ground?

IMPORTANT NOTES:

• In case of a sudden power loss or disconnecting and reconnecting of the plug to the

electrical socket, the compressor protective thermal element will be opened as the
pressure of the gas in the cooling system of your refrigerator has not yet been
balanced. 4 or 5 minutes later, your refrigerator will start to operate; this is normal.

• If you won’t be using your refrigerator for a long time (such as on summer holidays),

please disconnect the plug from the socket. Clean your refrigerator as per Part 4 of
this document and leave the door open to prevent any humidification or odor forma-
tion.

If there is still a problem with your refrigerator although you have followed the

instructions in this book, please consult your nearest authorized service center.

The life cycle of this product as determined and proclaimed by the Ministry of Industry

(the period for making spare parts available for the product to be able to fulfill its functions)
is 10 years.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Advertising
This manual is related to the following products: