Brinly LVS-33 BH PolyVAC System - Manual (Page 25)

L-1771-D
25.
TRACTOR PREPARATION
Measure the height of the Mower Deck opening
on your tractor. If the mower deck opening is 5-
3/4" or less use options 1,2, or 3 to mount the
Mower Deck Housing. If the Mower Deck
opening is greater than 5-3/4" use option 4.
Option 1. The top of the Mower Deck Housing
is flush with the top of the Mower Deck. Install
Large or Small Mower Deck Bracket using 1/4"
x1" or 5/16" x 1" Bolt (to match hole size in your
Mower Deck) with Flat Washer and Lock Nuts.
Align cut out Mower Deck Housing to discharge
opening in Mower Deck (under previously
installed Mower Deck Bracket) and mark the
three or two holes depending on Mower deck
Bracket type (Large, Small)
Drill 5/16" holes in the Mower Deck Housing.
Assemble Mower Deck Housing and to the
Mower Deck Bracket using 5/16" x 1" Carriage
Bolts (103), Flat Washers (106) and Lock Nuts
(109).
Option 2. The top of the Mower Deck Housing
is 3/8" or less above the mower deck. Install
Large or Small (Ears Up) Mower Deck Bracket
using 1/4" x 1" or 5/16" x 1" Carriage Bolt (to
match holes in your Mower Deck) with Flat
Washer and Lock Nuts. Use one to three Flat
Washers (110) to space Mower Deck Bracket
above Mower Deck Housing.
Align cut out Mower Deck Housing to discharge
opening in Mower Deck (under previously
installed Mower Deck Bracket) and mark the
three or two holes depending on Mower deck
Bracket type (Large, Small)
Drill 5/16" holes in the Mower Deck Housing.
Assemble Mower Deck Housing to the Mower
Deck Bracket using 5/16" x 1" Carriage Bolts
(103), Flat Washers (106) and Lock Nuts (109).
49.
Mower Deck
Mower Deck
Mower Deck
Mower Deck
93
96
93
99
Flush as possible
Flush as possible
93
96
93
99
OPTION 2
OPTION 1
110
110
103
106
109
103
106109
103
106
109
103
106
109
Mower Deck
Housing
Mower Deck
Housing
Mower Deck
Housing
Mower Deck
Housing
3/8" or less
3/8" or less
Step 22.
Option 1
Hardware Bag F
Step 22.
Option 2
Hardware Bag F