BUG-O Systems CW-5AX - Manual (Page 32)

32
CWO-3894 HILLSIDE KIT
The CWO- 3894 Hillside Kit provides a single rise and fall
motion per revolution of the machine to provide the motion
required to follow the contour of an offset pipe-to-pipe weld.
During standard operation, the cam mechanism of all Bug-O
Welders provides a dual rise and fall action per revolution to
follow the contour of a pipe-to-pipe weld.
Once the Hillside kit is installed on a Bug-O circle welder,
the operator can easily engage or disengage it to switch
between single or dual rise and fall operation.
ACCESSORIES
KBUG-5050 Stand Alone Weaver
The compact oscillator provides a pendulum
weaving motion to the gun. Speed, width and
dwells are independently adjustable.
CWO-3670 Step Adaptor
The Step Adaptor is a stepped centering device
used to center the machine on threaded I.D.
couplings. The range of the Step Adaptor is 1/2"
to 4" (13-102 mm) diameter.
CWO-3675 Groove Adaptor
For groove outlets of the following sizes: 1-1/4"
(31.75 mm), 1-1/2" (38.1 mm), 2" (50.8 mm),
2-1/2" (63.5 mm), 3" (76.2 mm), 4" (101.6 mm)
CWO-5790 Cone Adaptor
The Cone Adaptor is a tapered centering devise
used to center the machine on pipe stubbies.
The range of the Cone Adaptor is 1-1/4" to 4"
(32-102 mm) diameter.