BUG-O Systems UNI-BUG II - Manual (Page 8)

8
ITEM QTY PART NO. DESCRIPTION
* 1 1 BUG-1393 Volt Trap 120 VAC
* 2 1 BUG-1415 Pilot Light 120 VAC
3 1 BUG-1550 Gear Motor (150:1)
4 1 BUG-1725 Precision Speed Control
5 1 BUG-1785 Handle
6 1 BUG-1854 Screw Block with Insert
7 2 BUG-1858 Soc Hd Shr Scr 5/16 x 1 1/4 x 1/4-20
8 2 BUG-1859 Bearing Spacer
9 1 BUG-1863-R Idler Channel
10 1 UNI-1040 Drive Wheel Blk. Assy.
11 1 SWT-0810 Toggle Switch, ON-ON
12 2 BUG-1888 Drive Roll
13 2 BUG-1893 Retaining Ring 1/2" External
14 2 BUG-1895 Roller Bearing Assembly
15 2 BUG-1897 Sleeve
16 2 BUG-1898 Axle
17 4 BUG-1899 Washer 1 1/16 OD x 1/2 ID x 1/32 Thk
18 2 BUG-1988 Belleville Washer .323 ID x .709 OD
19 4 BUG-2012 Bearing
20 1 CIR-5247 0.7 Amp Circuit Breaker
21 1 BUG-2924 Reset Button Seal
22 4 BUG-5121 Stand Off
23 1 BUG-9103 Cord Grip
24 1 BUG-9444 Tool Kit
* 25 1 BUG-9445 Power Cord 120 V
26 1 BUG-1034 Panel Connector, 4-T, M
27 1 BUG-1035 Cable Connector, 4-T, F
28 1 BUG-9621 Knob
* 29 1 BUG-9675 Transformer 120 V
30 1 BUG-9677 Potentiometer
31 4 CON-1029 Washer 5/16 x .015 Thk
32 12 FAS-0114 Pan Hd Scr 6-32 x 3/8
33 7 FAS-0124 Pan Hd Scr 8-32 x 3/8
34 4 FAS-0204 Rnd Hd Sor 4-40 x 3/8
35 2 FAS-0357 Hex Hd Cap Scr 1/4-20 x 3/4
36 2 FAS-0452 Set Scr 1/4-20 x 1/4
37 4 FAS-0525 Soc Hd Cap Scr 8-32 x 1/2
38 4 FAS-1305 Hex Nut 4-40
39 3 FAS-1320 Hex Nut 8-32
40 1 FAS-1445 Phil Pan Hd Th Rolling 10-32 x 1/2
41 4 FAS-2824 Fit Hd Sit Scr 8-32 x 1 3/4
42 1 MUG-1192 Rotary Switch w/Knob, 4P, 3-Pos
43 1 UNI-1016 Cover
44 1 UNI-1017 Left Side Panel
45 1 UNI-1018 Right Side Panel
46 1 UNI-1021 Base Plate
47 2 UNI-1022 Slave Shaft
48 2 UNI-1024 Slave Pinion
49 1 UNI-1025 Pinion w/set screw
50 2 UNI-1029 Shaft Spacer
51 1 UNI-1030 Tensioning Screw Assembly (includes items 52,53,54)
52 1 RPS-0117 Roll Pin 3/32 x 3/4
53 1 UNI-1031 1/2-13 Threaded Stud
54 1 UNI-1032 Knob
55 3 WAS-0221 #8 Internal Star Lockwasher
56 1 WAS-0230 #10 Washer
57 2 WAS-0240 1/4 SAE Washer
58 2 BER-1001 Flange Bearing
59 2 BER-1002 Thrust Washer
* See Electrical Component Chart for 240 VAC and 42 VAC Part Numbers
UNI-1000 UNI-BUG II / PARTS LIST
17
UNI-BUG II WITH STITCH MODULE
UNI-BUG II w/Stitch Module
UNI-1550 120 VAC/50-60/1
UNI-1552 240 VAC/50-60/1
UNI-1554 42 VAC/50-60/1
“Remote” Position
The UNI-1550 is a modification of the UNI-BUG II, that has been adapted
to connect to a Stitch Module on a remote pendant.
A rotary selector switch enables the Stitch Module, and transfers control
of the speed, travel times and weld contactor to the pendant. For safety
reasons, the Weld Contact Toggle Switch on the UNI-BUG must be set in
the “0” or OFF when using the UNI-BUG in the Remote mode, or the weld
contactor will not operate.
With the Stitch Module removed, the unit will function as a standard
UNI-BUG II. The “Remote” position of the Rotary Switch will be disabled.
Rotary Travel
Switch
Weld Contact
Toggle Switch