BUG-O Systems Speed Weaver II - Manual (Page 2)

2
SAFETY
PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR
DEATH. KEEP CHILDREN AWAY. BE SURE THAT ALL INSTALLATION,
OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE
PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
1. Do not plug in the power cord without
first verifying the equipment is OFF and
the cord input voltage is the same as
required by the machine or serious
damage may result.
2. Do not leave the equipment unattended.
Remove from the worksite and store in
a safe location when not in use.
Read the instruction manual before installing
and using the equipment.
1.The equipment is not waterproof.
Using the unit in a wet environment
may result in serious injury. Do not
touch the equipment when wet or
standing in a wet location.
2.Never open the equipment without first
unplugging the power cord or serious
injury may result.
3. Verify the customer-supplied power
connections are made in accordance with
all applicable local and national electrical
safety codes. If none exist, use
International Electric Code (IEC) 950.
4.Never remove or bypass the equipment
power cord ground. Verity the equip-
ment is grounded in accordance with all
applicable local and national electrical
safety codes. If none exist, use lnterna-
tional Electrical Code (IEC) 950.
ELECTRIC SHOCK can kill.
READ INSTRUCTIONS
EQUIPMENT DAMAGE
POSSIBLE.
1.Never try to stop the pinion from
moving except by removing power or
by using the STOP control.
2. Do not remove any protective panels,
covers or guards and operate equipment.
FALLING EQUIPMENT
can cause serious personal
injury and equipment
damage.
Faulty or careless user installation is
possible. As a result, never stand or
walk underneath equipment.
MOVING PARTS can
cause serious injury.
CAUTION
DO NOT LEAVE EQUIPMENT UNATTENDED
WHEN NOT IN USE!
Remove from work site and store in a safe location.
15