BUG-O Systems GO-FER III-OX - Manual (Page 8)

8
TECHNICAL DATA (Welding)
Power Requirement: - 60 watts at rated voltage:
GOF-3240-WD (Welding) 120 VAC/50-60Hz/1Ph
GOF-3242-WD (Welding) 240 VAC/50-60Hz/1Ph
GOF-3244-WD (Welding) 42 VAC/50-60Hz/1Ph
Travel Speed: Infinitely variable from
2-50 ipm (50-1270 mm/min)
Load Capacity: 30 lbs (14 kg) vertical
100 lbs (45 kg) horizontal
Magnet Holding Power: 250 lbs (113 kg)
Net Weight of Drive Unit: 17 lbs (7.7 kg)
Dimensions of Drive Unit: 10" L x 8" W x 13" H
(254 mm x 203 mm x 330 mm)
Rail: (Ordered Separately) 4' (1.18 m) ARR-1085
8' (2.37 m) ARR-1080
Net Weight of Kit: 39 lbs. (17.7 kg)
Shipping Weight of Kit: 50 lbs. (22.7 kg)
Includes:
1 GOF-3240-WD GO-FER III w/ Dynamic Brake
Includes: 2-50 ipm (50-1270 mm/min)
1 BUG-5485 Contactor / Cable Anchor
1 BUG-5451 Rackholder with Short Handle
1 PAN-1015 Rack 22.62" (574 mm)
1 BUG-5462 Right Angle Clamp
1 BUG-5188 Torchholder Assembly
1 BUG-9444 Tool Kit
1 GOF-3255 Welding Support Kit
1 ARR-1080 Heavy Duty Rigid Rail 93.5" (2.37 m)
2 ARM-2010 On-Off Magnet Plate Assembly
2 ARM-2015 Spacer Bar Assembly
GOF-3252-WD Same as above except
w/ 240 VAC GO-FER III
GOF-3242-WD
GOF-3254-WD Same as above except
w/ 42 VAC GO-FER III
GOF-3244-WD
GOF-3250-WD GO-FER III WELDING KIT (120VAC/50-60Hz/1Ph)
CONVENIENT
CARRYING HANDLE
CONTACTOR
CABLE ANCHOR
POSITIVE RACK
AND PINION DRIVE
HEAVY DUTY
RIGID RAIL
TOOL KIT
ON/OFF MAGNET
ASSEMBLY (2)
SPACER BAR
ASSEMBLY (2)
Y-Z RACKING
GROUP