Cadac X16 - Manual (Page 10)

1-8
X16 MADI Merge Unit Revision MM2006-1
Replace the blown fuse with an identical type. See Fuse Types be-
low for further details.
Refit the fuse holder, taking care to align it properly. The guide arm
of the fuse holder slots into the power connector assembly.
Once in place, push the fuse holder home and confirm that it is fully
seated.
1.3 Fuse Types
Live: 90v - 250v: 1A Type T
Neutral: 90v - 250v: 1A Type T
FIG 1-2. Replace the fuse
Fuses
FIG 1-3. Push the fuse holder
home
Push in fuse holder