Campomatic B400 - Manual (Page 5)

5
B400
B. How to assemble & operate the B400
1. assemble and parts description
Before you actually assemble & use your B400, please see the Figure 1 for the relevant
description of parts shown below:
A- Ingredients Measurer
B- Lid
C- Locking slot
D- Blender Goblet
E- Motor Unit
F- ON/OFF & Speed Control Switch
G- Pulse Button
H- Auto Clean Button
2. Operation
This Multi Blender is ideal to process different style of foodstuff and mixtures including:
• Batters of pancakes, waffles, yorkshire pudding.
• Fruit juices, cocktails, crushed ice and milkshake.
• Creamy soup, sauces, and compotes.
i) Place the Blender Goblet (D) onto the Motor Unit (E) as shown in Figure 2. Make sure
the three pillars on the top of the Motor unit (E) are inserted into the three slots on the
bottom of the Blender Goblet (D).
ii) Put the ingredients into the Blender Goblet (D) for blending, then add the liquid. IT
IS VERY IMPORTANT that the liquid must not exceed the maximum level marked on the
Goblet.
iii) Put Ingredients Measurer (A) onto the Lid (B) and then put the Lid (B) onto the
Blender Goblet (D). Make sure the Lid (B) is locked into the Locking Slot (C). Otherwise,
the unit will not operate.
iv) Plug in your MULTI BLENDER and turn ON/OFF & Speed Control Switch (F) to either
“I” (slow speed) or “II” (fast speed). When using the “I” (slow speed), the maximum
capacity for operation is one litter.
v) You may also use the Pulse Button (G) but only at the time when you are turning ON/
OFF & Speed Control Switch (F) to “0”. Pressing the Pulse Button (G) leads the MULTI
BLENDER an instant quick start and releasing the Pulse Button (G) will stop the MULTI
BLENDER quickly.
HINTS: Pulse method [i.e. press/release, press/release…….. The Pulse Button (G) is
perfectly for milkshaking.
ENG