Campomatic CH1360 - Manual (Page 8)

When
cutting or
drilling
into wall
or ceiling,
do not
damage
electrical
wiring or
other
hidden
utilities.
Information
9
1. According to the figure, make sure
the position of hood in the cabinet.
The wood strips should be line up with
the 4 keyholes slots on the top of the
range hood. On the cabinet, install 4
screws (supplied) according to the
relative position of 4 key holes on the
bottom of hood. The extent of
screwing should be convenience to
the next installation.
2. Hang the hood and let it's 4
key holes aim at screws, the 4
screws should be in the narrow
parts of key holes. Screws
should be fasten firmly, make
sure that the installation
between the hood and cabinet is
enough fasten. 3. Install screws in the security
holes, in case of front and back
moving of hood, so that the using is
safer.
Security
hole
Key hole