Campomatic DW911ES - Manual (Page 21)

Connect the cold wate r supply hose to a threaded 3/4 (inch) connector and make su re
that it is fastened tightly in place.
If the water pipes are new o r have not been used for an extended period of time , let the
wate r run to make sure that the water is clea r. This precaution is needed to avoid th e
risk of the water in let to be blocked and damage the a ppliance.
Please close the hydrant after using.
Insert the drain h ose into a drain pipe with a minim um diameter of 40mm, or let i t run into the sink, making sur e to
avoid bendin g or crimping it. The top of the ho se must be less than 1000mm.
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
φ 40m m
B
19