Delta UNISAW 36-L352 - Manual (Page 8)

8
FUNCTIONAL DESCRIPTION
FOREWORD
The DELTA Unisaw is a 10" (254 mm) left-tilting saw with a 5/8" (16 mm) arbor.
36-L336; 36-L352: Comes with a 3 HP motor and a 36" (914 mm) rip capacity fence.
36-L552: Comes with a 5 HP motor and a 52" (1321 mm) rip capacity fence.
SPECIFICATIONS for 36-L336/ 36-L352 / 36-L552 saws
Max depth of cut at 90 degrees: 3-1/8" (79 mm)
Max depth of cut at 45 degrees: 2-1/8" (54 mm)
Max rip to right of blade:
52" (1.3 m) rip fence models 52" (1321 mm)
36" (914 mm) rip fence models 36" (914 mm)
Max rip to left of blade: 12" (305 mm)
Max width of dado: 1" (25.4 mm)
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
CARTON CONTENTS
1. Saw body (not shown)
2. Right and left extension wings
3. 5" (127 mm) to 4" (100 mm) reducer
4. M12 hex head screw (6)
5. M12 lockwasher (6)
6. 5/16-18 x 1" flat head socket screws (2)
7. 5/16-18 flange nut (2)
8. 5/16" External Tooth Washer
9. Washer
10. Miter gauge body
11. Miter gauge handle
2
3
4 6
5 7
8
9
10
11