Campomatic RB2200 - Manual (Page 13)

- 12 -
Fault Treatment
The cleaner
cannot operate.
1. Check whether the power plug is inserted securely;
pull out the plug and then reinsert it in the power
socket;
2. Check whether the power socket is turned ON
3. Check whether the switch on the cleaner is in “ON”
position.
Poor suction.
Getting too hot.
Cleaner stopped
when in use.
1. Check whether the floor brush, the hose and the pipes
are blocked, and remove any blockage immediately;
2. Check filters clean or replace filters Refer to
Fig 10&11