Campomatic RB2200 User Manual
Page 9
Advertising
- 8 -
Suction Control
To reduce the suction slide the suction control up as is shown in Figure (7).
Protective devices for motor
1. A temperature limiter switches the vacuum cleaner off automatically if it
gets too hot. This can occur if for instance hose, pipe or filters are blocked.
Switch the vacuum cleaner off immediately using the switch on the cleaner
Disconnect the power plug from the wall outlet
2. Remove the hose and pipe check for blockage, if they are not blocked clean
or replace filters and empty dust container
3. After cooling for about 30 minutes it can be switch on a gain
Suction Control
Figure (7)
Advertising