Campomatic Window AC - Manual (Page 13)

Installation Steps
Step 1. Remove the front panel and the air filter
1. Hold the slot under the front panel, then uplift it outwards, and remove the front panel
(See Fig.1).
2. Pinch the handle under the air filter and make the air filter arched, remove it from the
slot from underside to upside (See Fig.2).
6 6 4 5
Step 3. Installation
1. Remove th screws fix the chassis-fixing board and cabinet. some Models have two
more screws on the back of the cabinet. (see Fig.5)
2. Grasp the handle on the chassis and carefully slide the air conditioner out of the cabinet.
(see Fig.6)
3. When need to drain off water, intall the drain plug on the Chassis board. Then fix the
cabinet on the supporter (provide for yourself or contact the dealer)(see Fig.7).
4. Push the unit chassis into the cabinet. (see Fig.8)
5. Fix the chassis and cabinet. (see Fig.5)
e
Step 2. Remove the frame.
Remove the two fixed screws from the frame. (see Fig.3)
Grasp the left corner in the frame's underside, the loosen the frame. (see Fig.4) 1.
2.
10 10