Caple SBXC600SS - Manual (Page 7)

6
INSTALL FILTERS
(DUCTED AND NON-DUCTED HOODS)
1. To remove the grease filter, push in on them metal latch tab. This will disengage
the filter from the hood. Tilt the filter downward and remove.
2. To install the grease filter, align rear filter tabs with slots in the hood. Push in the
metal latch tab, push filter into position and release. Make sure the filter is securely
engaged after assembly.
(NON-DUCTED HOODS ONLY)
1. To install the charcoal filter, and lock it until the stop click is heard.
2. Install grease filter after charcoal filter is installed.