Caple AS610BK - Manual (Page 4)

1. For ease of installation, the light assembly should be fitted using a magnetic
screwdriver before the hood is installed on the wall.
2. The plastic cover is to protect the light assembly in transit. Once the light is
fitted to the hood, the plastic cover is easily removed by slackening the screws
and pulling the cover off.
4. For ease of installation, the light assembly should be fitted using a magnetic
screwdriver before the hood is installed on the wall.
5. The plastic cover is to protect the light assembly in transit. Once the light is
fitted to the hood, the plastic cover is easily removed by slackening the screws
and pulling the cover off.