Caple WF1546 - Manual (Page 7)

Setting the temperature
Each cooling compartment of the wine cooler is independently controlled. To set the temperature:
• Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically erased and each compartment will default to a
preset temperature setting of: 7°C for upper compartment, 7°C for middle compartment and
12°C for lower compartment.
• Upper and Middle compartment: Set the desired cooling temperature by pressing the buttons
adjacent to the “Set Upper/Set Middle” program. Each depression of the buttons will scroll through
the available temperature settings (for each compartment) in increments of 1 degree. The
temperature selected will flash in the LED display for approximately 5 seconds, then revert back to
display the set temperature of the cabinet.
Upper compartment: The temperature setting can be adjusted from 5°C to 18°C.
Middle compartment: The temperature setting can be adjusted from 5°C to 12°C.
• Lower compartment: Set the desired cooling temperature by pressing the buttons adjacent to the
“UP/DOWN” program. Each depression of the buttons will scroll through the available temperature
settings in increments of 1 degree. The temperature selected will flash in the LED display for
approximately 5 seconds, then revert back to display the set temperature of the cabinet.
The temperature setting can be adjusted from 12°C to 18°C.
NOTE:
If the unit is unplugged, if power is lost, or turned-off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
When you use the wine cabinet for the first time or restart the wine cabinet after it has been switched
off for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the wine cabinet has been running for a few hours, the temperature display will re-gain accuracy.
Locking the door
The door lock keys are located inside the plastic bag that contains the instruction manual. Insert the key
into the lock and turn it anticlockwise to unlock the door. To lock the door do the reverse operation
making sure metal pin is engaged completely. Remove the key and place it in a secure place for
safekeeping.
6