Caple WF1546 - Manual (Page 9)

How to change the door opening
This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit
comes with the unit (in the box), should you wish to reverse the hinge on your unit.
Fig.D
Fig.B Fig.A
Fig.C
1. Screws 2. Top hinge (right) 3. Lock hole decorative cover
4. Decorative nail 5. Screws 6. Door axis(right)
7. Door bracket 8. Lower hinge (left) 9. Lower hinge (right)
10. Top hinge (left)
1. Take out 4 screws (1) from top hinge (right) (2) and remove the top hinge (right),then put out the
door. (Fig.A)
2. Put the door safety and take out the lock hole decorative cover(3) and decorative nail (4) from top of
door frame, unscrew 2 screws (5) at bottom and remove the door axis(right) (6), then install the lock
hole decorative cover(3) and decorative nail (4) at bottom, please install the spare left door axis at top
of door frame. (Fig.B)
3. Remove the door bracket (7) from lower hinge(left)(8) and install it at lower hinge (right )（9）. (Fig.C)
4. The door revolves 180 degrees, put door axis to aim at lower hinge(left) and install the door onto
lower hinge(left), then close the door carefully.
5. Fix spare top hinge (left) (10) onto left top of cabinet with 4 screws (1), then adjust door. (Fig.D)
Note: This is a two person operation.
8