Caple C2471 - Manual (Page 22)

22
Installer's information
Housing
NB
The oven may be housed either under
a work surface or built into a column
that is open* or closed with a suitable
opening.
Your oven works at its best and produces
excellent results when cooking and
cleaning itself, if its air circulation is not
compromised:
• The oven must be centred in the unit so
that there is a minimum distance of 5 mm
between it and the surrounding unit.
• The housing unit or its outer surface must
be capable of withstanding heat.
• To ensure the oven rests firmly in the
housing, screw it to the housing unit using
the holes on the side uprights provided
(see diagram).
To do this:
Remove the rubber stoppers
masking the fixing holes.
To prevent the housing unit
splintering, drill two holes 3 mm in
diameter in the wall of the housing
unit opposite the fixing holes.
Attach the oven using the two
screws.
Conceal the hole using the rubber
stoppers. (These also help to
cushion the closing of the oven
door).
(*) If the housing unit is open at the back, the gap
must not be more than 70 mm.
4
3
2
1 Fixation
crew position
Cutout 50x50
Fixation
screw position