Caple C873G - Manual (Page 2)

2
GENERAL NOTICE
Dear Customer,
We thank you and congratulate you on granting us your preference, by purchasing one of our products.
We are sure that this new appliance, manufactured with quality materials, will meet your requirements in
the best possible way.
The use of this new equipment is easy. However, we invite you to read this booklet carefully, before
installing and using the appliance. This booklet gives the right information on the installation, use and
maintenance, as well as useful advice.
Caple
We invite you to read this instruction booklet carefully, before installing and using the equipment.
It is very important that you keep this booklet together with the equipment for any future
consultation.
If this equipment should be sold or transferred to another person, make sure that the new
user receives the booklet, so that he can learn how to operate the appliance and read the
corresponding notice.
This is a Class 3 appliance.
This appliance complies with the following Directives:
EEC 2009/142/CE (Gas) EEC 2004/108/CE (Electromagnetic Compatibility)
2006/95/CE (Low Voltage) EEC 89/109 (Contact with foods)
-The installation must be carried out by experienced and qualified personnel, in conformity with the
regulations in force.
-This appliance is not intended for use by person (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction cencerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
-While the appliance is running, watch the children and make sure they neither stay near the equipment,
nor touch the surfaces that have not cooled down completely.
-Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the
“installation” paragraph).
-Before carrying out the maintenance or cleaning the equipment, cut power supply off and make it cool
down.
-Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of oxygen.
-In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for
example by opening a window or increasing the mechanical suction power, if it exists.
-The products of combustion must be discharged outside through a suction hood or an electric fan (see the
“installation” paragraph).
-For any possible operation or modification, apply to an authorised Caple Service Centre and
demand original spare parts.
WARNING:
The product label, with the serial number, is applied under the hob.
The manufacturer refuses all responsibility for possible damages to things or people, resulting
from a wrong installation or from an improper, incorrect or unreasonable use of this equipment.