ChamSys SnakeSys - Manual (Page 22)

SnakeSys User Manual 16 / 44
4.1 Product Diagram
Note
Image shown in diagram is T2 product version MK1
For Simple Art-net or ACN to DMX output conversion the SnakeSys T2 inbuilt menu system can be used to quickly configure
the device for the required mode.
The T2 can be powered either by the Powercon Input socket or via PoE (Power over Ethernet) from a compatible device such as
the SnakeSys R4, when running via PoE the B4 accepts between 37-57V and 6.5-12.9W.
The T2 has an internal battery for configuring the unit without the need for connecting to a power source. The battery is used for
addressing and setup of the unit only.
If running it battery mode and not connected to a power source press the menu button once to power on.
4.2 DMX Connectors
The SnakeSys T2 has a total of six DMX Output connectors. The DMX Output connectors are arranged in two rows of three.
When operating in Art-Net or ACN mode the top row of DMX connectors output the first universe that the unit is addressed