Dolby Laboratories LS5000DVD - Manual (Page 6)

6
SETTING THE CLOCK
1. Press and hold the Power / Mode button to turn the unit On.
2. Press and hold the Display button. The clock will start
flashing, indicating the unit is in the clock setting mode.
3. Within 5 seconds, continuously press the Fast Reverse
button until the desired Hour is set. To quickly scroll
through the Hours, press and hold the same button. Note
the AM or PM indicator in the display.
4. Continuously press the Fast Forward button until the
desired Minute is set. To quickly scroll through the Minutes,
press and hold the same button.
5. The unit will exit the clock setting mode if either button is
not pressed within 5 seconds.
Note: To display the clock while in Radio, CD/DVD or AUX
mode, press the
Display button.
PM
Indicator
Automatically Store Stations
Select a Band (if needed). Press and hold the AS/PS button
for more than three seconds. The tuner will search for the six
strongest stations and store them in memory. The new sta-
tions replace stations that were already stored in the current
band.
Preset Scan
Select a Band (if needed). Press the AS/PS button. The tuner
scans for preset stations stored in the current band and paus-
es for five seconds at each station. When a desired station is
reached, press the AS/PS button again to stop scanning.
RADIO OPERATION
Audio Mode Selection
Select the desired audio mode by pressing the SEL button.
The modes will be displayed the following order: Volume,
Bass, Treble and Balance.
Volume
Increase the volume by pressing the button. Decrease the
volume by pressing the button.
Bass
Press SEL button two times. Increase the Bass by pressing
the button. Decrease the Bass by pressing the button.
Treble
Press SEL button three times. Increase the Treble by pressing
the button. Decrease the Treble by pressing the button.
Balance
Press SEL button four times. Adjust the Balance by pressing
either the button or the button.
R10 = Right speakers only
00 = Equal sound right and left
L10 = Left speakers only
Mute
Press and release the Mute / Loud button once to mute the
audio level. "MUTE" will appear in the display.
Loud
Press and hold the Mute / Loud button to enhance the high
and low frequency sound quality. "LOUD" will appear in the
display.
SOUND CONTROLS
LS5000DVD_UM.qxp 4/18/05 10:37 Page 6