Dolby Laboratories LS5000DVD - Manual (Page 8)

COMPACT DISC OPERATION
8
General Operations
1. Press and hold the Power / Mode button to turn the unit On.
2. Press on the disc door next to the word “PUSH”, the door
will open slightly. Then gently pull the door fully open.
3. Insert a disc onto the hub until it snaps into place.
4. Close the disc door until it locks into place.
5. Press the Power / Mode button until "DVD ON" appears in
the display. Disc play will start momentarily after "LOAD-
ING" and "CD" appear in the display.
DISC WARNINGS
TUNING
REPEAT
REP1
INTRO INTRO PROGRAM
RANDOM
PGM
Warning! Never touch the laser eye. Moisture and oils
from your fingers can impair proper operation.
Handling a Disc
1. When inserting a disc onto the disc hub, hold it with your
thumb, middle finger and index finger. Gently press in the
center of the disc until it is securely on the hub.
2. When removing the disc, always pull at the top left edge of
the disc until it snaps loose from the hub. There are indenta-
tions in the plastic for your fingers at this point.
3. Always keep your discs clean and free from scratches, finger-
prints and dirt.
TONE
POWER
MIN
TUNING
MAX
A
A - B
B
VOL
FM 88 92 98 104 108 MHz
AM 53 92 100 130 171 x10 KHz REPEAT
REPEAT
ALL INTRO PROG
RANDOM
CD TUN
AM FM
Play Program
The unit can be programmed to play disc titles and chap-
ters in a specified order.
1. At CD stop, press Prog button.
2. Program P00:00 is displayed.
3. Press numeric buttons to select favorite songs, press
Enter button.
4. To start playing programmed songs, press Play button.
To clear the program, select "CLEAR ALL" and press the
Enter button.
Stopping Play
To stop CD play, press the Stop button.
Pausing Play
To pause CD play, press the Pause button. To resume CD
play, press the Play button.
Fast Forward / Fast Reverse
To fast forward through a track during CD play, press and
hold the
Fast Forward button. Release the button to play
LS5000DVD_UM.qxp 4/18/05 10:37 Page 8