Cloud Electronics CXM2 - Manual (Page 12)

CXM User manual 11
4 CZ1 Zone Module
The CZ1 Zone Module extends the output facilities of the M1 and M2 Master Modules
by providing an extra 3 output zones, each with independent control of microphone and
music levels.
4.02 Zone 1
Separate microphone and music faders are provided and these control the respective
levels in the area assigned to Zone 1. Depending upon how the module was
configured by the installation engineer, the signal level may be controlled by the levels
set on the Master Module or totally independently.
The output signal can be monitored by pressing the Z1 PFL button. The PFL display
will accurately show the output signal level and the headphone amplifier will be
connected to the Zone 1 output signal.
4.03 Zone 2
This operates identically to Zone 1 above, and may sometimes be used as a record
output.
4.04 Zone 3
This Zone can only operate in the post-master fader mode i.e. signal levels are
controlled primarily by the master faders on the master module. An automute function
is provided. This will automatically mute the output when a microphone channel is
turned on via the microphone mute switch. This facility will only operate when the
"automute" is depressed, illuminating the adjacent LED, in addition, the microphone
channel(s) must have been configured at the time of installation.
30-08-02 V4.0