Code CR1000 Configuration Guide v0956 User Manual
Page 15
15
C005435_16 CR1000 CR1400 CR8000 Configuration Guide
For questions regarding reader configuration contact [email protected].
RS232 Interface
7 Data Bits
RS232 Interface
8 Data Bits - Default
RS232 Interface
Stop Bits 1 - Default
RS232 Interface
Stop Bits 2
RS232 Interface
Even Parity
RS232 Interface
Odd Parity
RS232 Interface
No Parity - Default
RS232 Interface
Flow Control Off - Default
RS232 Interface
Flow Control - Hardware
RS232 Packet Mode
RS232 Raw Mode - Default
Intentionally Blank
Reader Feedback
Settings
Beep On Vibrate On - Default
(CR1400)
Beep Off Vibrate Off
(CR1400)
Beep Off Vibrate On
(CR1400)
Beep On Vibrate Off
(CR1400)
Beep Volume 100% - Default
(CR1000 and CR1400)
Beep Volume 67%
(CR1000 and CR1400)
Beep Volume 33%
(CR1000 and CR1400)
A1
A4
A2
A3
B1
B4
B2
B3
C1
C4
C2
C3
D1
D4
D2
D3
E1
E4
E2
E3
CR1000/CR1400/CR8000 Configuration Guide
NOTE: The configuration change will take effect
immediately and be saved to memory.