Compuprint MDP40B - Manual (Page 42)

38
Setup Parameter Values Description
AUTO GAP OFFSET -0,075 mm, -0.050 mm,
-0.025 mm, +0.000 mm,
+0.025 mm, +0.050 mm,
+0.075 mm, +0.100 mm Sets the automatic gap offset to one of the given values.
GET EDGE QUOTE
0/2”, 1/2”, 2/2”, 3/2”, 4/2”,
5/2”, 6/2”, 7/2” Sets the position in which the left paper edge is checked. If
set to 0, the check is performed at the first line. The other
values correspond to the physical distance from the first
line.
PROGRAM 1 PROGRAM 2
Setup Parameter Values Description
PROTOCOL EPSON 570, IBM X24E,
X24E AGM, IBM 2390,
OLI. PR40+, OLI. PR2,
OLI. PR2845, IBM 4722,
IBM 9068 Defines the printer protocol.
NOTE: For the IBM 4722 and 9068 protocols, if the
software driver uses the controlled link of the IBM financial
driver, set the
INTERFACE TYPE item in the Configuration
Menu to financial .
FONT Draft, Courier, OCR-B,
Gothic, Prestige, Present,
OCR-A, Script, Boldface Selects the font.
HORIZONTAL PITCH 10 cpi, 12 cpi, 15 cpi,
16.6 cpi, 17.1 cpi, 20 cpi Selects the character spacing in characters per inch (cpi).
VERTICAL PITCH 5 lpi, 6 lpi, 8 lpi Selects the line spacing in lines per inch (lpi).