Comtech EF Data CDM-710G - Manual (Page 243)

CDM-710G High-Speed Satellite Modem Revision 1
FAST Activation Procedure MN-CDM710G
C–3
d) Enter the 20-character FAST code carefully. Use the ◄ ► arrow keys to move the cursor
to each character, then use the ▲ ▼ arrow keys to edit that character:
Edit 20 digit FAST Code:
00000000000000000000 ENT
c) Press ENTER when done. The modem responds with “Configured Successfully”
if the new FAST option is accepted:
Configured Successfully
(ENTER or CLEAR)
Press [ENTER] or [CLEAR] as directed. The modem will then reset to its default
configuration.
d) If, on the other hand, the FAST code is not valid, the code is rejected and following
message is displayed:
FAST Code Rejected!
(ENTER or CLEAR)
e) Press [ENTER] or [CLEAR] as directed, then re-enter the FAST code. Contact Comtech
EF Data Customer Support if the problem persists.