Comtech EF Data HPCST-5000 - Manual (Page 121)

High-Power C-Band Satellite Terminal Operation
Rev. 0 5–9
5.4.2 Monitor
Refer to Figure 5-4.
The MONITOR menu is accessible from the SELECT menu. When the MONITOR
menu is entered, press [
" ] or [ # ] to select the desired function.
Each monitor function is displayed in real time as long as it is selected.
RFT-500
VER: X.X.X
SELECT
MONITOR
U/C TEMP D/C TEMP
HPA TEMP TUV
-40° to +90°C
(Status only)
-40° to +90°C
(Status only)
-40° to +90°C
(Status only)
1 to 11 V
(Status only)
TDV TIV
1 to 11 V
(Status only)
1 to 11 V
(Status only)
ACCESS TO
SUBMENU
CONDITIONAL OR
OPTION-DEPENDENT
Parameter Information
Key:
Figure 5-4. Select Monitor Menu
Function Description
U/C TEMP Up converter temperature monitor
Range: -40 to +90
'C (-40 to 194'F)
D/C TEMP Down converter temperature monitor
Range: -40 to +90
'C (-40 to 194'F)
HPA TEMP HPA temperature monitor
Range: -40 to +90
'C (-40 to 194'F)
TUV Tuning voltage monitor for up converter synthesizer
Range: 1 to 11V
TDV Tuning voltage monitor for down converter synthesizer
Range: 1 to 11V
TIV Tuning voltage monitor for the IF LO
Range: 1 to 11V