Comtech EF Data CRS-200 REDUNDANCY SWITCH User Manual
Page 30
CRS-200
COMTECH COMMUNICATIONS CORPORATION
CRS-200 REDUNDANCY SWITCH - OPERATIONS MANUAL PAGE 28
COMTECH CRS-200 SWITCH
S/N 1020 S/W VER 1.01
SELECT: CONFIG INFO
MONITOR STORE/LD UTIL
9.2
MENU TREE
Figure 6 shows the menu structure of the CRS-200. The detailed screens and menus will now
be described.
Note: The ‘level’ of the menu (how far down into the structure) is indicated by how far the
screen is indented from the left.
OPENING SCREEN
This screen is displayed whenever power is first applied to the unit. Pressing any key
will take the user to the top level selection screen:
SELECT
The user is presented with the following choices:
CONFIG
(Configuration) This menu branch permits the user to fully
configure the switch.
INFO
(Information) This menu branch permits the user to view
information on the switch, without having to go into
configuration screens.
MONITOR
(Monitor) This menu branch permits the user to monitor the
current status of the switch and view the log of stored events for
both the switch and its attached modems.
STORE/LD
(Store/Load) This menu branch permits the user to store and to
retrieve up to 10 different switch configurations.
UTIL
(Utility) This menu branch permits the user to perform
miscellaneous functions, such as setting the Real-time clock,
adjusting the display brightness, etc.
Each of these options is now described in detail.