Comtech EF Data CRS-200 REDUNDANCY SWITCH User Manual
Page 40
CRS-200
COMTECH COMMUNICATIONS CORPORATION
CRS-200 REDUNDANCY SWITCH - OPERATIONS MANUAL PAGE 38
STORE CONFIGURATION TO
LOCATION: 10 (ENTER)
YOUR CONFIGURATION HAS
BEEN STORED! (ENTER)
WARNING! LOC 10 CONTAINS
DATA OVERWRITE? NO YES
LOAD CONFIGURATION FROM
LOCATION: 10 (ENTER)
THE NEW CONFIGURATION
HAS BEEN LOADED (ENTER)
WARNING! LOC 10 CONTAINS
NO DATA! (ENTER)
(STO/LD)
STORE
The user is prompted to select the location to store the current
configuration to, using the
UP/DOWN arrow keys, then to press
ENTER. Locations 1 through 10 are available. If the selected location
does not contain a previously stored configuration, the following screen
is displayed:
Pressing
ENTER or CLEAR will take the user back to the previous menu.
If, however, the selected location contains a previously stored
configuration, the following screen is displayed:
The user is prompted to select NO or YES using the
LEFT/RIGHT arrow
keys, then to press
ENTER. Selecting YES will overwrite the existing
configuration at the selected location.
(STO/LD)
LOAD
The user is prompted to select the location to load a configuration from,
using the
UP/DOWN arrow keys, then to press ENTER. Locations 1
through 10 are available. If the selected location contains valid data,
the following screen will be displayed:
Pressing
ENTER or CLEAR will take the user back to the previous menu.
If, however, the selected location does not contain valid data, the
following screen will be displayed:
Pressing
ENTER or CLEAR will take the user back to the previous menu.