Comtech EF Data LPOD User Manual
Page 60
Advertising
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC)
MN-LPOD
Updating Firmware
Revision 10
3–6
• Next, open a Command-line window…
o
For Windows 95 or Windows 98 – Type “command”.
o
For any Windows OS versions later than Windows 98 – Type “cmd” or
“command”.
o
Alternately, from [Start], select All Programs > Accessories > Command
Prompt.
o
Finally, from the Command-line ‘c:\>’ prompt, type “mkdir temp” or “md temp”
(mkdir and md stand for make directory), and then click [OK].
There should now be a ‘temp’ folder created and available for placement
of the firmware file download.
Advertising