1 admin | access – Comtech EF Data LPOD User Manual
Page 79
LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter
MN-LPOD
Ethernet-based Remote Product Management
Revision 10
4–15
4.5.4.2 Admin Pages
The Admin pages are available only to users who have logged in using the
Administrator Name and Password.
Click the Admin tab, and then select the Access or SNMP hyperlink to continue.
4.5.4.2.1
Admin | Access
The Administrator must use this page to manage the Web Server Interface user access settings.
Figure 4-4. Admin | Access Page
Click [Refresh] (at the top of the page) to update the page appearance to the current operating
configuration.
Network Maintenance
•
IP Gateway, IP Address/Range: Enter the desired IP Gateway Address and IP Address/
Range in these text boxes.
•
MAC Address (read-only): The MAC is set at the factory to a guaranteed unique address that
you cannot modify.
Click [Change IP Address] to save any changes. Otherwise, click [Reset] if you wish to revert to
the previously assigned IP Gateway and IP Address/Range.